PM Screw air compressor 150hp, Direct Drive
1. Axial /centrifugal fan control system ;
2. The customer dose not need to install electricity meters and
monitors to display electricity directly ;
3. We can customize all kinds of products for our customers ;
4. The efficient permanent magnet motor and the Airend are
perfectly matched. Through the advanced speed regulation and
frequency conversion technology of the frequency converter, it can
greatly reduce the use cost of customers and provide stable and
reliable compressed air.
5. Permanent magnet frequency conversion model can adjust the
running speed of air compressor according to the air consumption of
the terminal, so that the power consumed by the air compressor is
in linear proportion to the gas produced, which has achieved the
purpose of stabilizing the pressure and saving energy
Specification:
Model | Power(KW) | Pressure(MPa) | Capacity(m3/min) | Pipe Diameter | Weight (kg) | Dimension(mm) |
HV10 | 7.5 | 0.8-1.3 | 0.7-1.1 | G1/2 | 180 | 960*650*850 |
HV15 | 11 | 0.8-1.3 | 1.0-1.7 | G3/4 | 300 | 1000*750*1000 |
HV20 | 15 | 0.8-1.3 | 1.6-2.3 | G3/4 | 320 | 1000*750*1000 |
HV30 | 22 | 0.8-1.3 | 2.7-3.4 | G1 | 420 | 1070*850*1260 |
HV40 | 30 | 0.8-1.3 | 3.1-5.0 | G1 | 450 | 1070*850*1260 |
HV50 | 37 | 0.8-1.3 | 4.7-6.4 | G1 1/2 | 600 | 1200*1000*1390 |
HV60 | 45 | 0.8-1.3 | 5.7-7.2 | G1 1/2 | 700 | 1200*1000*1390 |
HV75 | 55 | 0.8-1.3 | 6.7-9.4 | G2 | 920 | 1700*1200*1550 |
HV100 | 75 | 0.8-1.3 | 9.1-12.2 | G2 | 950 | 1700*1200*1550 |
HV125 | 90 | 0.8-1.3 | 11.4-15.2 | G2 | 1350 | 2100*1300*1650 |
HV150 | 110 | 0.8-1.3 | 14.5-19.9 | DN80 | 2650 | 2500*1650*1900 |
HV180 | 132 | 0.8-1.3 | 16-23 | DN80 | 2850 | 2500*1650*1900 |
HV220 | 160 | 0.8-1.3 | 21-27 | DN80 | 4100 | 3000*1900*1950 |
HV250 | 185 | 0.8-1.3 | 23-30 | DN80 | 4300 | 3000*1900*1950 |
HV270 | 200 | 0.8-1.3 | 25.5-32.5 | DN100 | 5300 | 3600*2200*2200 |
HV300 | 220 | 0.8-1.3 | 28.8-38 | DN100 | 5500 | 3600*2200*2200 |
HV340 | 250 | 0.8-1.3 | 31.5-43 | DN100 | 5800 | 3600*2200*2200 |
Company Service
1. Our Advantages Service:
We have own developing and designing team, which ensure our own
technological and innoative products for customers.
For any customers who send us the samples of rotors or airend, we
will design and develop better ones based on the samples.
We are manufacturer, factory, so we have the ability of mass
production.
2. Technical Support:
Most of our WOYO products adopt German advanced technilogy, and the
producing machine are all equipped with German and Japan.
3. After Sale Service:
Our working team will always reply you if you need any technical
support and help, we can use video, whatsapp and other commication
tools to help you solve the problems.
